Sector: Medical & Pharmaceuticals | Sub Sector: Medical Equipment & Devices

Course Introduction: The course contains lecture, demonstration, and hands-on training, which teach participants proper operation, calibration, and preventive maintenance of the fluoroscopy and C-arm system, which can show real time image during the procedures.

Career Prospect: Biomedical Engineer, Biomedical Equipment Technician, Biomedical Manager | Potential Salary: RM1,500 - RM2,000

Learning Outcomes: Introduction to fluoroscopy system/C arm, Fluoroscopy parts/C arm parts and accessories, Image Processing System, Maintenance and calibration.

Contact: Ahmad Noor Ariff Bin Zainal Abidin | anariff@mara.gov.my  | 06-9756201

Sector: Electronic, Telecommunication & Broadcasting Industry | Sub Sector: Electronic

Course Introduction: Customize Industrial application using embedded open source platform to reduce design and development cost.

Career Prospect: Engineer, Technical Assistant, Technician, Technical student | Potential Salary: RM1,500 - RM2,000

Learning Outcomes: Learn to utilize capacity of Arduino microcontroller board for different application.

Contact: Ahmad Noor Ariff Bin Zainal Abidin | anariff@mara.gov.my  | 06-9756201  

Sector: Electronic, Telecommunication & Broadcasting Industry | Sub Sector: Electronic

Course Introduction: To introduce graphical programming method, To introduce virtual instrument applications, To associate the selected micro controller with graphical programming applications.

Career Prospect: IPTA / IPTS students, Industry workers | Potential Salary: RM1,500 - RM2,000

Learning Outcomes: Introduction to graphical programming environments, Running/Debugging VI, Data Acquisitions, Interfacing with micro controller.

Contact: Ahmad Noor Ariff Bin Zainal Abidin | anariff@mara.gov.my  | 06-9756201

Sector: Electronic, Telecommunication & Broadcasting Industry | Sub Sector: Maintenance & Support Center

Course Introduction: This course offers knowledge and skills to install, operate and troubleshoot a small enterprise branch network including basic network security. 

Career Prospect: Network Technician, Specialist, Engineer | Potential Salary: RM1,500 - RM2,000

Learning Outsomes: Operation of IP Data Networks, LAN Switching Technologies, IP addressing (IPv4/IPv6), IP Routing Technologies, IP Services, Network Device Security, Troubleshooting.

Contact: Ahmad Noor Ariff Bin Zainal Abidin | anariff@mara.gov.my  | 06-9756201  

Sector: Information & Communication Technology (ICT) | Sub Sector: Maintenance & Support Center

Course Introduction: This course offers knowledge and skills to install, configure, operate, and troubleshoot medium-size routed and switched networks. 

Career Prospect: Network Technician, Specialist, Engineer | Potential Salary: RM1,500 - RM2,000

Learning Outcomes: LAN Switching Technologies, IP Routing Technologies, IP Services, Troubleshooting, WAN Technologies.

Contact: Ahmad Noor Ariff Bin Zainal Abidin | anariff@mara.gov.my  | 06-9756201 

Sector: Information & Communication Technology (ICT) | Sub Sector: Maintenance & Support Center

Course Introduction: This course offers knowledge and skills required to develop a security infrastructure, recognize threats and vulnerabilities to networks, and mitigate security threats.

Career Prospect: Network Technician, Specialist, Engineer | Potential Salary: RM2,000 - RM2,500

Learning Outcomes: Security Concepts, Secure Access, VPN, Secure Routing and Switching, Cisco Firewall Technologies, IPS, Content and Endpoint Security.

Contact: Ahmad Noor Ariff Bin Zainal Abidin | anariff@mara.gov.my  | 06-9756201 

Sector: Information & Communication Technology (ICT) | Sub Sector: Maintenance & Support Center

Course Introduction: This course offers knowledge and skills required in enterprise roles such as network engineer, support engineer, systems engineer or network technician which focus on IP Routing concept.

Career Prospect: Network Technician, Specialist, Engineer | Potential Salary: RM2,000 - RM2,500

Learning Outcomes: Network Principles, Layer 2 Technologies, Layer 3 Technologies, VPN Technologies, Infrastructure Security, Infrastructure Services.

Contact: Ahmad Noor Ariff Bin Zainal Abidin | anariff@mara.gov.my  | 06-9756201 

Sector: Information & Communication Technology (ICT) | Sub Sector: Maintenance & Support Center

Course Introduction: This course offers knowledge and skills required in enterprise roles such as network engineer, support engineer, systems engineer or network technician which focus on IP Switched Network concept.

Career Prospect: Network Technician, Specialist, Engineer | Potential Salary: RM2,000 - RM2,500

Learning Outcomes: Layer 2 Technologies, Infrastructure Security, Infrastructure Services.

Contact: Ahmad Noor Ariff Bin Zainal Abidin | anariff@mara.gov.my  | 06-9756201 

Sector: Information & Communication Technology (ICT) | Sub Sector: Maintenance & Support Center

Course Introduction: This course offers knowledge and skills required in enterprise roles such as network engineer, support engineer, systems engineer or network technician which focus on troubleshooting methods and tools. 

Career Prospect: Network Technician, Specialist, Engineer | Potential Salary: RM2,000 - RM2,500

Learning Outcomes: Troubleshooting Methods, Structured Troubleshooting, Network Maintenance Tasks and Best Practices, Using Specialized Maintenance and Troubleshooting Tools.

Contact: Ahmad Noor Ariff Bin Zainal Abidin | anariff@mara.gov.my  | 06-9756201 

Sector: Information & Communication Technology (ICT) | Sub Sector: Maintenance & Support Center

Course Introduction: This course offers knowledge and skills required for Windows Server 2012

Career Prospect: System Administartor, Computer Technician, ICT Technician, Engineer | Potential Salary: RM2,000 - RM2,500

Learning Outcomes: Installation of Windows Server 2012 R2, Installation and Configuration Active Directory, Installation and configuration Services

Contact: Ahmad Noor Ariff Bin Zainal Abidin | anariff@mara.gov.my  | 06-9756201 

Sector: Perubatan & Farmaseutikal (Rujuk NOSS m/s 84) | Sub Sector: Pembuatan Produk Farmaseutikal (Rujuk NOSS m/s 90)

Course Introduction: Mempraktik elemen 'GMP' dalam industri bagi mendapatkan persijilan dari pihak berkuasa.

Career Prospect: Usahawan berasaskan herba, Eksekutif dan bukan eksekutif dalam bidang pemprosesan berasaskan herba (QA, QC, Production, Store) | Potential Salary: RM1,200 - RM10,000

Learning Outcomes: Mempelajari elemen penting dalam 'GMP' iaitu kawalan proses, susun atur kilang, 'traceability', kebersihan dan lain-lain dalam penghasilan produk yang berkualiti dan selamat.

Contact: Ahmad Noor Ariff Bin Zainal Abidin | anariff@mara.gov.my | 06-9756201 

Sektor: Medical & Pharmaceuticals | Sub Sektor: Medical Equipment & Devices

Pengenalan Kursus: The aim of this course is to investigate various features of clinical application, principle of operation, performance and maintenance for biomedical equipment. This is an essential to understand the fundamental general design, the operation of critical components, functionalities and use of biomedical equipment.

Potensi Pekerjaan: Biomedical Engineer, Biomedical Equipment Technician, Biomedical Manager | Potensi Gaji: RM1,500 - RM2,000

Hasil Pembelajaran: Clinical Application of equipment, Principle Operations of equipment, Permormance & maintenance of equipment, Electrical Safety Test. 

Hubungi: Nik Samsulbahri B. Zainu | samsulbahari.zainu@mara.gov.my  | 09-8629292

Sektor: Electronic, Telecommunication & Broadcasting Industry | Sub Sektor: Electronic

Pengenalan Kursus: This course offers methods to create circuit schematic, Footprint and PCB circuit by using Proteus 8 based according to IPC standard. 

Potensi Pekerjaan: Engineer, Technical Asistant, Technician, Technical student | Potensi Gaji: RM1,500 - RM2,000

Hasil Pembelajaran: Schematic CAD Software PROTEUS 8 and Board Layout CAD Software.

Hubungi: Nik Samsulbahri B. Zainu | samsulbahari.zainu@mara.gov.my  | 09-8629292

Sektor: Electronic, Telecommunication & Broadcasting Industry | Sub Sektor: Electronic

Pengenalan Kursus: This course offers skills to create  PCB board by using latest, PCB equipment according to, IPC standard.

Potensi Pekerjaan: Engineer, Technical Assistant, Technician, Technical student | Potensi Gaji: RM1,500 - RM2,000

Hasil Pembelajaran: Transfer and developing of artwork, Board etching, drilling and finishing, Health and Safety related to PCB fabrication.

Hubungi: Nik Samsulbahri B. Zainu | samsulbahari.zainu@mara.gov.my  | 09-8629292

Sektor: Medical & Pharmaceuticals | Sub Sektor: Medical Equipment & Devices

Pengenalan Kursus: Principles of servicing diagnostic x-ray systems is a skills development program that teaches the new service professional the cognitive skills necessary to understand the X-ray system and its applications in the medical community. The program is divided into five major learning units:Introduction to radiography and imaging,Radiation safety, The production of X-rays, Formation of the X-ray image,Film and film processing. 

Potensi Pekerjaan: Biomedical Engineer, Biomedical Equipment Technician, Biomedical Manager | Potensi Gaji: RM1,500 - RM2,000

Hasil Pembelajaran: Introduction to radiography and imaging, Radiation safety, The production of X-rays, Formation of the X-ray image, Film and film processing.

Hubungi: Nik Samsulbahri B. Zainu | samsulbahari.zainu@mara.gov.my  | 09-8629292

Sektor: Medical & Pharmaceuticals | Sub Sektor: Medical Equipment & Devices

Pengenalan Kursus: Ultrasound training course contains lecture, demonstration and hands-on training. The course is divided into the following modules; Introduction to Ultrasound, Maintenance and performance check,Image quality check and Electrical Safety Test (EST).

Potensi Pekerjaan: Biomedical Engineer, Biomedical Equipment Technician, Biomedical Manager | Potensi Gaji: RM1,500 - RM2,000

Hasil Pembelajaran: Introduction to Ultrasound, Ultrasound system and mode, Ultrasound system component, Maintenance and calibration check of ultrasound system.

Hubungi: Nik Samsulbahri B. Zainu | samsulbahari.zainu@mara.gov.my  | 09-8629292

Sektor: Medical & Pharmaceuticals | Sub Sektor: Medical Equipment & Devices

Pengenalan Kursus: Principles of servicing diagnostic x-ray systems is a skills development program that teaches the new service professional the cognitive skills necessary to understand the X-ray system and its applications in the medical community. The course contains lecture, demonstration, and hands-on training, which teach participants proper operation, calibration, and preventive maintenance of the general X-ray system. 

Potensi Pekerjaan: Biomedical Engineer, Biomedical Equipment Technician, Biomedical Manager | Potensi Gaji: RM1,500 - RM2,000

Hasil Pembelajaran: Introduction to radiography and imaging, The production of X-rays (x ray tube), Basic block diagram for general x ray, Image quality, Maintenance and calibration check.

Hubungi: Nik Samsulbahri B. Zainu | samsulbahari.zainu@mara.gov.my  | 09-8629292

Sektor: Medical & Pharmaceuticals | Sub Sektor: Medical Equipment & Devices

Pengenalan Kursus: The course contains lecture, demonstration, and hands-on training, which teach participants proper operation, calibration, and preventive maintenance of the mobile X-ray system, which is a device that can be transported to emegency rooms and wards. 

Potensi Pekerjaan: Biomedical Engineer, Biomedical Equipment Technician, Biomedical Manager | Potensi Gaji: RM1,500 - RM2,000

Hasil Pembelajaran: Introduction to mobile x–ray system, The production of x-rays, Mechanical parts and accessories of mobile x-ray system, Maintenance and calibration check.

Hubungi: Nik Samsulbahri B. Zainu | samsulbahari.zainu@mara.gov.my  | 09-8629292